How to manage your Materialize migrations with Laravel Zero?

Introduction

Managing your schema migrations is essential for any application. In this tutorial, we will show you how to manage your Materialize schema migrations with Laravel Zero.

Materialize is a streaming database that takes data coming from different sources like Kafka, PostgreSQL, S3 buckets, and more and allows users to write views that aggregate/materialize that data and let you query those views using pure SQL with very low latency.

Prerequisites

Before you start this tutorial, you need to have the following:

What is Laravel Zero?

Laravel Zero is an open-source PHP framework that can be used for creating console applications.

Laravel Zero is not an official Laravel package but was created by Nuno Maduro, who is also a Software Engineer at Laravel, so I have no doubts about the code quality.

For more information on how to get started with Laravel Zero, I would suggest the following article:

Demo project

I have prepared a demo project that you can use to try out Laravel Zero and Materialize!

Downloading the mzschema binary

Rather than cloning the repository, you can also use the following command to download only the executable file:

wget https://github.com/bobbyiliev/mzschema/raw/main/builds/mzschema

Then make the file executable:

CHECKOUT OUR LATEST PRODUCT — THE ULTIMATE TAILWINDCSS PAGE CREATOR 🚀

chmod +x mzschema

And finally, run the installer:

./mzschema install

Output:

Materialize Migrations  SQLite database created successfully at:$HOME/.mz_migrations/mzschema/database.sqlite

The above command creates a SQLite database in $HOME/.mz_migrations/mzschema/database.sqlite. The SQLite database is used to store the schema migration history.

Note: As of the time being, this is a required workaround for Materialize and would not be needed once the following issue is resolved: sql: support “SERIAL” type.

Clone the mzschema repository (optional)

Alternatively, you could clone the project and build it with the following commands:

git clone https://github.com/MaterializeInc/materialize/issues/8779
cd mzschema
php mzschema app:build

This generates the single mzschema build file that you can run independently.

Environment variables

If your Materialize instance is running on a different host than the one you are running Laravel Zero, you can set the following environment variables to point to the correct host:

  • Create a file called .env in the same directory as the mzschema binary.
  • Add the following lines to the .env file:
MZ_CONNECTION=pgsql
MZ_HOST=127.0.0.1
MZ_PORT=6875
MZ_DATABASE=materialize
MZ_USERNAME=materialize
MZ_PASSWORD=materialize

Change the values to match your Materialize instance.

If Materialize is running on the same host as Laravel Zero, you don’t need to set any environment variables.

Creating a migration

Once you have the mzschema binary installed, you can create a new directory called migrations in the same directory as the mzschema binary:

mkdir migrations

Then you can create a new migration file in the migrations directory.

Let’s go ahead and create a migration called 2022_03_16_155051_create_users_table.php and add the following code:

<?phpuse Illuminate\Database\Migrations\Migration;
use Illuminate\Database\Schema\Blueprint;
use Illuminate\Support\Facades\Schema;
return new class extends Migration
{
/**
* Run the migrations.
*
* @return void
*/
public function up()
{
DB::connection('materialize')->statement(
"CREATE TABLE transfers (id int, name text)"
);
}
/**
* Reverse the migrations.
*
* @return void
*/
public function down()
{
DB::connection('materialize')->statement(
"DROP TABLE IF EXISTS transfers"
);
}
};

A quick rundown of the migration file:

  • In the up() method, we create the transfers table. You can change this according to your needs and define your SOURCE and VIEWS DDL statements.
  • In the down() method, we drop the transfers table. In there you would always want to define your DROP DDL statement.

Running the migrations

To run the migration, you can use the following command:

./mzschema migrate --path=./migrations/ --realpath

Output:

Do you really wish to run this command? (yes/no) [no]:
> yes
Migrating: 2022_03_16_155051_create_transfers_table
Migrated: 2022_03_16_155051_create_transfers_table (8.97ms)

Next, you could try adding a new migration file and run the migration again!

Note: you can change the --path=./migrations/ to match your project's migrations directory.

Here is a quick demo of how it all works:

Checking migration status

To check the migration status, you can use the following command:

./mzschema migrate:status --path=./migrations/ --realpath

The output will look like this:

+------+------------------------------------------+-------+
| Ran? | Migration | Batch |
+------+------------------------------------------+-------+
| Yes | 2022_03_16_155051_create_transfers_table | 2 |
+------+------------------------------------------+-------+

Rolling back the migrations

In some cases, you might want to undo a migration. To do that, you can roll back the migration, you can use the following command:

./mzschema migrate:rollback --path=./migrations/ --realpath

Or if you want to roll back all migrations, you can use the following command:

./mzschema migrate:refresh --path=./migrations/ --realpath

Limitations

As of the time of being, Materialize does not support ALTER statements for SOURCE and VIEW, meaning that you will have to manually create a new migration to change the source of your data.

Let’s review two possible solutions to this problem:

Renaming

A possible solution to this is to create a new migration that will drop the old VIEW and create a new one with your new structure.

So it could look like this, let’s say you have a view called transfers which you want to add an amount column to:

  • Create a new migration that creates a new VIEW with your new structure called transfers_new
  • In the same migration, rename the old VIEW to transfers_old
  • Then rename the new VIEW from transfers_new to transfers

An example code snippet for the above migration:

<?phpuse Illuminate\Database\Migrations\Migration;
use Illuminate\Database\Schema\Blueprint;
use Illuminate\Support\Facades\Schema;
return new class extends Migration
{
/**
* Run the migrations.
*
* @return void
*/
public function up()
{
// Create the new `transfers_new` view
DB::connection('materialize')->statement(
"CREATE TABLE transfers_new (id int, name text, amount int)"
);
// Rename the old `transfers` view to `transfers_old`
DB::connection('materialize')->statement(
"ALTER TABLE transfers RENAME TO transfers_old"
);
// Rename the new `transfers_new` view to `transfers`
DB::connection('materialize')->statement(
"ALTER TABLE transfers_new RENAME TO transfers"
);
}
/**
* Reverse the migrations.
*
* @return void
*/
public function down()
{
DB::connection('materialize')->statement(
"DROP TABLE IF EXISTS transfers, transfers_old, transfers_new"
);
}
};

If you are using this with a Materialized view, you might have to add some logic to check if the view is ready before you can rename it.

Branching

Another approach to this problem is to create a new migration that creates a new SOURCE and VIEWS with a specific version appended to the name.

For example, if you have a transfers view and you want to add an amount column to it, you can create a new migration that creates a new VIEWS called transfers_v2.

That way you would have the two views in your database, transfers and transfers_v2 at the same time and you will have to handle the logic to decide which one to use in your application.

This is a good approach as your database will be more stable and you will be able to roll back to the previous version of your application, the transfers view will always be available.

Blue-green deployments

Both of the above solutions could be used in a blue-green deployment scenario.

For more information on blue-green deployments, please refer to the following article:

Conclusion

This tutorial has covered the basics of managing your schema migrations with Laravel Zero.

How do you manage your schema migrations? I would love to hear about the tools that you use and give them a try with Materialize!

To learn more about Materialize, check out the official Materialize documentation.

If you need any help, please join the Materialize Community Slack channel.

--

--

Get the Medium app

A button that says 'Download on the App Store', and if clicked it will lead you to the iOS App store
A button that says 'Get it on, Google Play', and if clicked it will lead you to the Google Play store
Bobby Iliev

Bobby Iliev

I am a professional System Administrator with a demonstrated history of working in the internet industry. I am a Linux lover